Diferenças

Esta página mostra as diferenças entre as duas revisões da página.

Ligação para esta vista de comparação

Ambos os lados da revisão anterior Revisão anterior
Próxima revisão
Revisão anterior
fonera2100 [2009/10/17 03:40]
jm
fonera2100 [2009/10/17 04:05]
jm
Linha 118: Linha 118:
 </​code>​ </​code>​
 Boot inicial. Notar que vai ser construido o filesystem (jffs2) pelo que é um boot mais demorado que os seguintes. Boot inicial. Notar que vai ser construido o filesystem (jffs2) pelo que é um boot mais demorado que os seguintes.
-<​code>​ 
-+PHY ID is 0022:5521 
-Ethernet eth0: MAC address 00:​18:​84:​FF:​FF:​FF 
-IP: 10.0.1.2/​255.255.255.0,​ Gateway: 10.0.1.254 
-Default server: 10.0.1.21 
  
-RedBoot(tm) bootstrap and debug environment [ROMRAM] +**Exemplo para 802.11g ahdemo**
-Non-certified release, version v1.3.0 - built 16:57:58, Aug  7 2006 +
- +
-Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc. +
- +
-Board: ap51  +
-RAM: 0x80000000-0x81000000,​ [0x80040450-0x80fe1000] available +
-FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each. +
-== Executing boot script in 3.000 seconds - enter ^C to abort +
-RedBoot> fis load -l vmlinux.bin.l7 +
-Image loaded from 0x80041000-0x80282085 +
-RedBoot> exec +
-Now booting linux kernel: +
- Base address 0x80030000 Entry 0x80041000 +
- ​Cmdline :  +
-Linux version 2.6.26.5 (nbd@baustelle) (gcc version 4.1.2) #21 Sat Feb 14 23:12:28 CET 2009 +
-CPU revision is: 00019064 (MIPS 4KEc) +
-Determined physical RAM map: +
- ​memory:​ 01000000 @ 00000000 (usable) +
-Initrd not found or empty - disabling initrd +
-Zone PFN ranges: +
-  Normal ​         0 ->     ​4096 +
-Movable zone start PFN for each node +
-early_node_map[1] active PFN ranges +
-    0:        0 ->     ​4096 +
-Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 4064 +
-Kernel command line: console=ttyS0,​9600 rootfstype=squashfs,​jffs2 init=/​etc/​preinit +
-Primary instruction cache 16kB, VIPT, 4-way, linesize 16 bytes. +
-Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 16 bytes +
-PID hash table entries: 64 (order: 6, 256 bytes) +
-console [ttyS0] enabled +
-Dentry cache hash table entries: 2048 (order: 1, 8192 bytes) +
-Inode-cache hash table entries: 1024 (order: 0, 4096 bytes) +
-Memory: 13564k/​16384k available (1876k kernel code, 2820k reserved, 310k data, 124k init, 0k highmem) +
-SLUB: Genslabs=6, HWalign=32, Order=0-3, MinObjects=0,​ CPUs=1, Nodes=1 +
-Mount-cache hash table entries: 512 +
-net_namespace:​ 644 bytes +
-NET: Registered protocol family 16 +
-Radio config found at offset 0xf8(0x1f8) +
-AR531x PCI init...  +
-done +
-PCI: fixing up device 0,3,0 +
-PCI: Failed to allocate mem resource #​1:​4000000@84000000 for 0000:​00:​00.0 +
-PCI: Failed to allocate mem resource #​1:​4000000@84000000 for 0000:​00:​03.0 +
-NET: Registered protocol family 2 +
-IP route cache hash table entries: 1024 (order: 0, 4096 bytes) +
-TCP established hash table entries: 512 (order: 0, 4096 bytes) +
-TCP bind hash table entries: 512 (order: -1, 2048 bytes) +
-TCP: Hash tables configured (established 512 bind 512) +
-TCP reno registered +
-NET: Registered protocol family 1 +
-ar531x: Registering GPIODEV device +
-squashfs: version 3.0 (2006/​03/​15) Phillip Lougher +
-Registering mini_fo version $Id$ +
-JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. +
-msgmni has been set to 26 +
-io scheduler noop registered +
-io scheduler deadline registered (default) +
-gpiodev: gpio device registered with major 254 +
-gpiodev: gpio platform device registered with access mask FFFFFFFF +
-Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled +
-serial8250: ttyS0 at MMIO 0xb1100003 (irq = 37) is a 16550A +
-eth0: Atheros AR231x: 00:​18:​84:​29:​f3:​1c,​ irq 4 +
-ar2313_eth_mii:​ probed +
-eth0: attached PHY driver [Generic PHY] (mii_bus:​phy_addr=0:​00) +
-cmdlinepart partition parsing not available +
-Searching for RedBoot partition table in spiflash at offset 0x7d0000 +
-Searching for RedBoot partition table in spiflash at offset 0x7e0000 +
-6 RedBoot partitions found on MTD device spiflash +
-eth0: Configuring MAC for full duplex +
-Creating 6 MTD partitions on "​spiflash":​ +
-0x00000000-0x00030000 : "​RedBoot"​ +
-0x00030000-0x00720000 : "​rootfs"​ +
-mtd: partition "​rootfs"​ set to be root filesystem +
-split_squashfs:​ no squashfs found in "​spiflash"​ +
-0x00720000-0x007e0000 : "​vmlinux.bin.l7"​ +
-0x007e0000-0x007ef000 : "FIS directory"​ +
-0x007ef000-0x007f0000 : "​RedBoot config"​ +
-0x007f0000-0x00800000 : "​boardconfig"​ +
-Registered led device: gpio1 +
-Registered led device: wlan +
-Registered led device: gpio3 +
-Registered led device: gpio4 +
-Registered led device: gpio7 +
-TCP vegas registered +
-NET: Registered protocol family 17 +
-802.1Q VLAN Support v1.8 Ben Greear <​greearb@candelatech.com>​ +
-All bugs added by David S. Miller <​davem@redhat.com>​ +
-jffs2_scan_eraseblock():​ End of filesystem marker found at 0x270000 +
-jffs2_build_filesystem():​ unlocking the mtd device... done. +
-jffs2_build_filesystem():​ erasing all blocks after the end marker... done. +
-VFS: Mounted root (jffs2 filesystem) readonly. +
-Freeing unused kernel memory: 124k freed +
-Please be patient, while OpenWrt loads ... +
-Algorithmics/​MIPS FPU Emulator v1.5 +
-- preinit - +
-Press CTRL-C for failsafe +
-- init - +
- +
-Please press Enter to activate this console.  +
- +
- +
-BusyBox v1.11.2 (2009-01-05 06:34:55 CET) built-in shell (ash) +
-Enter '​help'​ for a list of built-in commands. +
- +
-  _______ ​                    ​________ ​       __ +
- ​| ​      ​|.-----.-----.-----.| ​ |  |  |.----.| ​ |_ +
- ​| ​  ​- ​  ​|| ​ _  |  -__|     ​|| ​ |  |  ||   ​_|| ​  _| +
- ​|_______|| ​  ​__|_____|__|__||________||__| ​ |____| +
-          |__| W I R E L E S S   F R E E D O M +
- ​KAMIKAZE (8.09, r14511) ---------------------------- +
-  ​10 oz Vodka       Shake well with ice and strain +
-  ​10 oz Triple sec  mixture into 10 shot glasses. +
-  * 10 oz lime juice  Salute! +
- ​--------------------------------------------------- +
-root@OpenWrt:/#​ device eth0 entered promiscuous mode +
-br-lan: port 1(eth0) entering learning state +
-br-lan: topology change detected, propagating +
-br-lan: port 1(eth0) entering forwarding state +
-PPP generic driver version 2.4.2 +
-ip_tables: (C) 2000-2006 Netfilter Core Team +
-br-lan: port 1(eth0) entering disabled state +
-br-lan: port 1(eth0) entering learning state +
-br-lan: topology change detected, propagating +
-br-lan: port 1(eth0) entering forwarding state +
-nf_conntrack version 0.5.0 (1024 buckets, 4096 max) +
-wlan: trunk +
-ath_hal: module license '​Proprietary'​ taints kernel. +
-ath_hal: 2008-10-02 (AR5212, AR5312, RF5111, RF5112, RF2316, RF2317, REGOPS_FUNC,​ TX_DESC_SWAP,​ DFS, XR) +
-ath_rate_minstrel:​ Minstrel automatic rate control algorithm 1.2 (trunk) +
-ath_rate_minstrel:​ look around rate set to 10% +
-ath_rate_minstrel:​ EWMA rolloff level set to 75% +
-ath_rate_minstrel:​ max segment size in the mrr set to 6000 us +
-wlan: mac acl policy registered +
-ath_ahb: trunk +
-Atheros HAL provided by OpenWrt, DD-WRT and MakSat Technologies +
-wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps +
-wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps +
-wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps +
-wifi0: H/W encryption support: WEP AES AES_CCM TKIP +
-ath_ahb: wifi0: Atheros 2315 WiSoC: mem=0xb0000000,​ irq=3 +
- +
-root@OpenWrt:/#​  +
-</​code>​ +
-Exemplo para 802.11g ahdemo:+
 <​code>​ <​code>​
 config wifi-device ​ wifi0 config wifi-device ​ wifi0
Linha 303: Linha 154:
 Chegamos a destruir algumas foneras para aproveitar peças quando isto acontecia. Recentemente concluimos que manter premido o reset durante 30-40s enquanto ligamos a alimentaçao aparenta resolver o problema. Chegamos a destruir algumas foneras para aproveitar peças quando isto acontecia. Recentemente concluimos que manter premido o reset durante 30-40s enquanto ligamos a alimentaçao aparenta resolver o problema.
  
-===== Referências ​===== +===== Links ===== 
-[[http://​wiki.openwrt.org/​oldwiki/​openwrtdocs/​hardware/​fon/​fonera|Fonera na OldWiki do OpenWRT.org]]+  ​* ​[[http://​wiki.openwrt.org/​oldwiki/​openwrtdocs/​hardware/​fon/​fonera|pagina wiki da fonera em openwrt.org]] 
 +  * [[http://​ecos.sourceware.org/​docs-latest/​redboot/​redboot-guide.html|manual do redboot]] 
 +  * [[http://​www.neophob.com/​serendipity/​index.php?/​archives/​132-Using-Openwrt-on-La-Fonera-for-Dummies.html|Using OpenWRT on La Fonera for Dummies]]
  
-[[http://​www.neophob.com/​serendipity/​index.php?/​archives/​132-Using-Openwrt-on-La-Fonera-for-Dummies.html|Using OpenWRT on La Fonera for Dummies]] 
Print/export
QR Code
QR Code fonera2100 (generated for current page)